Controls the analogical output compound. More...
#include <libm2k/analog/m2kanalogout.hpp>
Public Member Functions | |
| virtual std::vector< int > | getOversamplingRatio ()=0 |
| Retrieve the global oversampling ratio. | |
| virtual int | getOversamplingRatio (unsigned int chn)=0 |
| Retrieve the oversampling ratio for the given channel. | |
| virtual std::vector< int > | setOversamplingRatio (std::vector< int > oversampling_ratio)=0 |
| Set the value of the oversampling ratio for each channel. | |
| virtual int | setOversamplingRatio (unsigned int chn, int oversampling_ratio)=0 |
| Set the oversampling ratio for the given channel. | |
| virtual std::vector< double > | getSampleRate ()=0 |
| Retrieve the sample rate of both DACs. | |
| virtual double | getSampleRate (unsigned int chn)=0 |
| Retrieve the sample rate for the given channel. | |
| virtual std::vector< double > | getAvailableSampleRates (unsigned int chn)=0 |
| getAvailableSampleRates | |
| virtual std::vector< double > | setSampleRate (std::vector< double > samplerates)=0 |
| Set the sample rate for both channels. | |
| virtual double | setSampleRate (unsigned int chn, double samplerate)=0 |
| Set the sample rate for the given channel. | |
| virtual void | setCyclic (bool en)=0 |
| Enable or disable the cyclic mode for all digital channels. | |
| virtual void | setCyclic (unsigned int chn, bool en)=0 |
| Enable or disable the cyclic mode for all digital channels. | |
| virtual bool | getCyclic (unsigned int chn)=0 |
| Retrieve the value of the cyclic mode. | |
| virtual double | getScalingFactor (unsigned int chn)=0 |
| Retrieve the scaling factor for the given channel. | |
| virtual double | getFilterCompensation (double samplerate)=0 |
| Retrieve the filter compensation for the given sample rate. | |
| virtual void | pushBytes (unsigned int chnIdx, double *data, unsigned int nb_samples)=0 |
| Send the samples to the given channel. | |
| virtual void | pushRawBytes (unsigned int chnIdx, short *data, unsigned int nb_samples)=0 |
| Send the samples to the given channel. | |
| virtual void | pushInterleaved (double *data, unsigned int nb_channels, unsigned int nb_samples)=0 |
| Send samples to all the channels. | |
| virtual void | pushRawInterleaved (short *data, unsigned int nb_channels, unsigned int nb_samples)=0 |
| Send samples to all the channels. | |
| virtual void | push (unsigned int chnIdx, std::vector< double > const &data)=0 |
| Send the samples to the given channel. | |
| virtual void | pushRaw (unsigned int chnIdx, std::vector< short > const &data)=0 |
| Send the samples to the given channel. | |
| virtual void | push (std::vector< std::vector< double > > const &data)=0 |
| Send samples to channels. | |
| virtual void | pushRaw (std::vector< std::vector< short > > const &data)=0 |
| Send samples to channels. | |
| virtual void | stop ()=0 |
| Stop all channels from sending the signals. | |
| virtual void | stop (unsigned int chn)=0 |
| Stop the given channels from sending the signals. | |
| virtual void | cancelBuffer ()=0 |
| Cancel all buffer operations of enabled channels. | |
| virtual void | cancelBuffer (unsigned int chn)=0 |
| Cancel all buffer operations of the given channel. | |
| virtual void | enableChannel (unsigned int chnIdx, bool enable)=0 |
| Enable or disable the given digital channel. | |
| virtual bool | isChannelEnabled (unsigned int chnIdx)=0 |
| Check if the given channel is enabled. | |
| virtual bool | isPushDone (unsigned int chnIdx) const =0 |
| Check if the generation of the signal (only for non-cyclic buffer) is done. | |
| virtual void | setKernelBuffersCount (unsigned int chnIdx, unsigned int count)=0 |
| Set the kernel buffers to a specific value. | |
| virtual unsigned int | getKernelBuffersCount (unsigned int chnIdx) const =0 |
| Get the number of kernel buffers. | |
| virtual short | convertVoltsToRaw (unsigned int channel, double voltage)=0 |
| Convert the volts value of a sample into raw. | |
| virtual double | convertRawToVolts (unsigned int channel, short raw)=0 |
| Convert the raw value of a sample into volts. | |
| virtual struct IIO_OBJECTS | getIioObjects ()=0 |
| Get access to IIO channels, buffers, devices and context. | |
| virtual unsigned int | getNbChannels ()=0 |
| Retrieve the number of analogical channels. | |
| virtual std::string | getChannelName (unsigned int channel)=0 |
| Get the channel name for each DAC channel. | |
| virtual double | getMaximumSamplerate (unsigned int chn_idx)=0 |
| Get the maximum samplerate for the DAC. | |
| virtual unsigned short | setVoltage (unsigned int chn_idx, double volts)=0 |
| Sets the voltage output of the DAC channel. | |
| virtual unsigned short | setVoltageRaw (unsigned int chn_idx, unsigned short raw)=0 |
| Sets the raw output of the DAC channel. | |
| virtual libm2k::M2kHardwareTrigger * | getTrigger ()=0 |
| Get the hardware trigger handler. | |
| virtual void | setBufferRearmOnTrigger (bool enable)=0 |
| Allows sequential output of multiple buffers with each trigger event. | |
| virtual bool | getBufferRearmOnTrigger () const =0 |
| Retrieve the value of the attribute that controls buffer rearm on trigger. | |
Detailed Description
Controls the analogical output compound.
The documentation for this class was generated from the following file:
Generated by
1.15.0